48-Port L3 Managed Gigabit & 10G Enterprise Network Switch – S5710-54TX
Layer 3 Switch, 48 * 10/100/1000M Base-T, 6 * 1000M Base-X SFP/10GE SFP+, support single AC or dual AC+AC power
Overview
The S5710-54TX L3 Managed Switch is a high-performance solution for enterprise networks and service providers, offering 48×Gigabit RJ45 ports and 6×10G SFP+ uplinks for reliable aggregation and high-speed access. With 128Gbps switching capacity and low-power design, this Layer 3 Enterprise Switch ensures energy-efficient operation and secure data forwarding.
Supporting IPv4/IPv6 dual-stack routing, advanced QoS and ACL policies, and robust redundancy protocols (STP, RSTP, MSTP, ERPS, LACP), the 48-Port L3 Managed Switch delivers scalable, stable, and flexible networking. With features like stacking up to 8 units, Ethernet OAM, and unified management, the S5710-54TX is ideal for core, aggregation, and high-density enterprise deployments.
| S5710-54TX | |
|
|
48* 100/1000M Base-T RJ45 port
6* SFP/10G SFP+ port AC input: 100~240V,50/60Hz DC： 40V～60V 19”1U (440*290*44mm) |
Key Features
Stacking Capabilities
- Support Stacking of 8 units through a single IP address
- Support Unified management
- Support Redundancy mechanism
- Support High speed interconnect
Equipment Stability
- Support IPv4/IPv6 dual protocol stack platform based on Linux operating system
- Support multiple link redundancy and network redundancy protocols such as STP / RSTP / MSTP / ERPS / LACP
QoS Capabilities
- Support port speed and flow speed limit function
- Support classification based on service flow and Qos flow control function
- Support queue scheduling algorithms such as SP/WRR/SP+WRR
- Support port-based and service flow-based mirroring functions
Multi-service Capabilities
- Support DHCP Server and DHCP Relay
- Support L2-Tunnel
- Support Ethernet OAM protocol such as CFM / EFM
Routing Protocol
- Support static route
- Support dynamic route such as RIP / OSPF / BGP / ISIS
- Support IPV4/IPV6 dual protocol stack
- Support RIPng / OSPFv3
Safety Mechanism
- Support ACL security filtering mechanism, which can provide security control based on MAC, IP, L4 port
- Support ARP attack automatic protection
- Support DHCP attack automatic protection based on MAC Address
- Support DHCP snooping / IP-source-Guard / 802.1X and other security features
- Support link protection functions such as BFD, Flex Link, LACP and ERRP
- Support remote loop detection function
- Support CFM、EFM
- Support remote user authentication based on TACACS+, Radius, and Local user authentication
Network Management Function
- Support CLI based on RS232 serial port, Telnet and SSHv2
- Support WEB-based configure operation management, support SNMP V1/V2/V3
- Support remote upgrade or equipment through FTP and TFTP
Hardware Specifications
| Attributes | S5710-12TX | S5710-28TX | S5710-28TP | S5710-54TX |
| Port | 8*10/100/1000M/ Ethernet port
4 *10G SFP+ |
24*10/100/1000M/ Ethernet port
4 *10G SFP+ |
24*10/100/1000M/ Ethernet port/POE
4 *10G SFP+ |
48*10/100/1000M/ Ethernet port
6 *10G SFP+ |
| Chipset | RTL9301 | RTL9311 | ||
| Switching Capacity | 96Gbps | 128Gbps | 216Gbps | |
| Forwarding Rate | 71.43Mpps | 95.24Mpps | 160.71Mpps | |
| MAC | 16K | 32K | ||
| Multicast | 1K | 4K | ||
| Packet Buffer | 12Mbit | 16Mbit | ||
| ARP Table | 2K | 8K | ||
| Routing Table | 512 | 12K | ||
| PoE Budget | N/A | N/A | 415W(af/at) | N/A |
| Memory and Storage | Memory: 512MB, Storage:32MB | |||
| Power Supply | AC： 100～240V 50/60Hz；
DC： 40V～60V； |
|||
| Power Consumption | Idle ≤10W
Full load ≤20W |
Idle ≤13W
Full load ≤30W |
Idle ≤15W
Full load ≤450W |
Idle ≤25W
Full load ≤53W |
| Weight | 1.6kg | 2.6kg | 4.2Kg | 4.2kg |
| Dimensions
（WxDxH） |
270X180X44mm | 440X210X44mm | 440X260X44mm | 440×290×44mm |
| Temperature | Working Temperature：-10℃～50℃； Storage Temperature：-40℃～70℃ | |||
| Humidity | Relative Humidity: 5%~95%, non-condensing | |||
Software Specifications
| Attributes | S5710 Series |
| VLAN | Support 4K VLAN
Support VLAN based on port, MAC and protocol Support dual Tag VLAN, port-based Static QinQ and Flexible QinQ Access/Trunk/Hybrid VLAN Swap |
| Ethernet | Ethernet interface operating modes
Ethernet interface operating rates Jumbo Frame Port enable/disable Flow-control TX/RX Port based storm-control Unknow unicast/multicast/broadcast storm-control Port-isolate |
| Stack | Support Stacking of 8 units through a single IP address
Support Unified management Support Redundancy mechanism Support High speed interconnect |
| MAC | Support static MAC address setting
Support black hole MAC address filtering Support port MAC address limit Automatic learning and aging of MAC addresses |
| ARP | Static and dynamic ARP entries
Aging of ARP entries ARP-Proxy |
| Port Control | Support two-way bandwidth control
Support port storm suppression Support 9K Jumbo ultra-long frame forwarding |
| Port Aggregation | Support static link aggregation
Support dynamic LACP Each aggregation group supports a maximum of 8 ports LAG load balance（SIP/DIP/SMAC/DMAC） |
| Mirroring | Supports multi-port mirroring analysis
Service flow-based image analysis |
| ACL | Support standard and extended ACL
Support ACL policy based on time period Provide MAC, IP, L4 port and port level security control functions |
| QoS | Traffic classification based on COS/DSCP (simple classification)
Traffic classification based on ACL (complex classification) Traffic classification based on inner header of the tunnel packets Queue scheduling Remark the priority fields (COS/DSCP) of the packet based on ACL Flow redirection Flow mirror Traffic policing based on direction(in/out) of Port Traffic policing based on direction(in/out) of VLAN Traffic policing based on direction(in/out) of flow Traffic policing based on direction(in/out) of aggregated flow Queue based traffic shaping Port based traffic shaping SP（Strict Priority）scheduling WRR（Weighted Round Robin）scheduling SP + WRR mixed scheduling IPv4-v6 QoS |
| Safety | Support user hierarchical management and password protection
Support IEEE 802.1X authentication Support Radius & TACACS+ authentication Support MAC address learning limit, support black hole MAC function Support port isolation Support broadcast message rate suppression Support IP Source Guard Support ARP flood suppression and ARP spoofing protection |
| Layer 3 | Support ARP learning and aging
Support IPv4/IPv6 static route Support dynamic route RIP/OSPF/BGP/ISIS Support IPv4/IPv6 dual-stack platform Support VRRP、CLI、Telnet、WEB、SNMP V1/V2/V3、SSHv2 mode |
| Terminal Services | Configurations through CLI
Console Terminal service |
| Maintenance | Per-module Debug features
ICMP Debug CPU usage display and alarm Memory usage display and alarm Device temperature、PSU、FAN、status display and alarm User operation logs Management of logs, alarms, and debugging information VCT（Virtual Cable Test） Detailed Diagnostic-information collection Manual /Schedule reboot Reboot Information logging Ping IPv6 Ping Trace route Port/Flow/Remote mirror Multi-destination mirror（m:n） To CPU/From CPU packets statistics Time configuration Timezone |
| System Security | SSHv1/v2
RADIUS TACACS+ Authentication Accounting Port based dot1x MAC based dot1x MAC/IP ACL Basic Mode ACL Port/VLAN/L4-Port ACL Time Range IP Source Guard Limitation on MAC address learning on interface Rate limit CPU Traffic Limit CLI/WEB/SNMP/Telnet/SSH filtering |
| Spanning-Tree | Rapid Spanning-Tree Protocol
Multi-instance Spanning-Tree Protocol |
| Network
Management |
DHCP Server
DHCP Relay DHCP Snooping DHCP Option60 DHCP Option82 SNTP（Simple Network Time Protocol） LLDP |
| Configuration Management | In-band management interface and configuration
Privileged user priority and privileged commands Network management based on SNMPv1/v2c/v3 Public and private MIB Public and private Trap Configuration and management based on WEB Restore factory default configuration |
| File system | Upload and download files through FTP or TFTP
Upload and download files through X modem |
| System Management | Support FTP, TFTP file upload and download
Support SNTP Support system work log Support LLDP neighbor device discovery protocol Support 802.3ah Ethernet OAM Support RFC1213 SNMP network management Support PING and Tracert Supports configuration management based on WEB pages Support the whole machine power failure alarm function |
| Upgrade | Upgrade with the local image file
Upgrade with the remote TFTP server Online upgrade U-boot |
Purchase Info
| Product Name | Product Description |
| S5710-12TX | 8*10/100/1000M Base-T, 4*1000M Base-X SFP/10GE SFP+, Single Power, Fanless |
| S5710-28TX | 24*10/100/1000M Base-T, 4*1000M Base-X SFP/10GE SFP+, Single Power, 1*FAN |
| S5710-28TP | 24*10/100/1000M Base-T POE, 4*1000M Base-X SFP/10GE SFP+, Single Power, 3*FAN |
| S5710-54TX | 48*10/100/1000M Base-T, 6*1000M Base-X SFP/10GE SFP+, Single Power，2*FAN |
https://www.youtube.com/@e-Link-n6r
10G Enterprise Switch 10G Enterprise Switch 10G Enterprise Switch 10G Enterprise Switch 10G Enterprise Switch 10G Enterprise Switch 10G Enterprise Switch 10G Enterprise Switch
Reviews
There are no reviews yet