GP5810-08 XG(S)-PON OLT | 8-Port Combo XGSPON Optical Line Terminal | 100G Uplink, 1U Rackmount

$6,710.00

& Free Shipping
  • Comply with ITU-T G.984/987/G.988 technical standards, with good connectivity capabilities
  • Pon port can support GPON/XGPON/XGSPON three modes
  • Rich Layer 2/3 switching features and Flexible management methods
  • Support multiple link redundancy protocols such as FlexLink/STP/RSTP/MSTP/ERPS/LACP
  • Support RIP、OSPF
  • Support Power redundancy backup, Modular power supply, Modular fans supply
  • Support ONT power failure alarm

The packing list contains two modules.

Note: To avoid compatibility issues, we recommend using our PON module.

PON module:XGSPON & GPON Combo OLT SFP+ Transceiver


Web User Manual: XG(S)GPON WEB USER MANUAL-20221024

Operation Manual: XGPON OLT Operation Manual V1.1(20220829)


Download Datasheet (PDF):GP5810-08 XGS Combo OLT Datasheet V3.0

Similar products:16-Port XGSPON Combo Optical Line Terminal – GP5810-16

SKU: GP5810-08 Category:
Guaranteed Safe Checkout

GP5810-08 XG(S)-PON OLT | 8-Port Combo XGSPON Optical Line Terminal | 100G Uplink, 1U Rackmount

8*XG(S)-PON/GPON Combo port, 8*GE/10GE SFP+, 2*100GE QSFP28, support AC/DC power opitional

 

Product Overview

GP5810-08 OLT is a highly integrated, large-capacity XG(S)-PON OLT for operators, ISPs, enterprises, and campus applications. The product follows the ITU-T G.987/G.988 technical standard, and can be compatible with three modes of G/XG/XGS at the same time.

The asymmetric system (up 2.5Gbps, down 10Gbps) is called XGPON, and the symmetric system (up 10Gbps, down 10Gbps) is called XGSPON. The product has good openness, strong compatibility, high reliability and complete software functions, together with the optical Network unit (ONU), it can provide users with broadband, voice, video, surveillance and other comprehensive service access. It can be widely used in operators’ FTTH access, government and enterprise park access, campus network access, ETC. XG(S)-PON OLT provides higher bandwidth. In application scenarios, service configuration and O&M completely inherit GPON.

GP5810 is only 1U in height, easy to install and maintain, and save space. Supports mixed networking of different types of ONUs, which can save a lot of costs for operators.

Product Highlight  

  • Comply with ITU-T G.984/987/G.988 technical standards, with good connectivity capabilities
  • Pon port can support GPON/XGPON/XGSPON three modes
  • Rich Layer 2/3 switching features and Flexible management methods
  • Support multiple link redundancy protocols such as FlexLink/STP/RSTP/MSTP/ERPS/LACP
  • Support RIP、OSPF
  • Support Power redundancy backup, Modular power supply, Modular fans supply
  • Support ONT power failure alarm

Device Brief Information

 

GP5810-08
8*XG(S)-PON/GPON Combo port

8*1000M Base-X SFP/8*10GE SFP+

2*40G/100G QSFP28

19” Rack-mount (440mm*270mm*44mm)

AC: 100~240V 47/63Hz;

DC: 36V~75V;

Solution Display

The XG-PON system usually consists of the OLT at the office side, the ONU and the ODN at the user side, and adopts a point-to-multipoint network structure. The ODN consists of single-mode optical fibers and passive optical devices such as optical splitters and optical connectors. It provides the optical transmission medium for the physical connection between the OLT and ONU.

Hardware Specification

Attributes GP5810-08
Interface 8*XG(S)-PON/GPON Combo port,

8*1000M Base-X SFP/8*10GE SFP+,

2*40G/100G QSFP28

Exchange Capacity 720Gbps
Forwarding Rate 535.68Mpps
Memory and Storage Memory:2GB, Storage:8GB
MAC Address 32K
Packet Buffer 72Mbit
Management Port Console, MGMT
PON Comply with ITU-T G.987/G.988 standard;

Wavelength of GPON: 1490nm downstream and 1310nm upstream;

Wavelength of XGPON: 1577nm downstream, 1270nm upstream;

GPON: Downstream – 2.48832Gbps, Upstream – 1.24416Gbps;

XGPON: Downstream – 9.95328Gbps, Upstream – 2.48832Gbps.

XGSPON: Downstream – 9.95328Gbps, Upstream – 9.95328Gbps;

GPON supports a maximum distance of 60KM logical distance, 20KM physical distance, and 20KM differential distance;

XGPON supports a maximum distance of 100KM logical distance, 40KM physical distance, and 40KM differential distance;

PON port total 1:256 Maximum spectral ratio,

GPON 1:128, XGPON/XGSPON 1:128;

Standard OMCI management function;

Open to any brand of ONT;

ONU batch software upgrade;

PON module adapts to standard 20PIN SFP+ package module

Environment Temperature Working Temperature:-10℃~55℃

Storge temperature:-40℃~70℃

Environment Humidity Relative Humidity: 5%~95%, non-condensing
Environment Friendly RoHS
Weight 6.5KG
Fan Modular fans supply (1)
Power AC: 100~240V 47/63Hz;

DC: -36V~-75V;

Power Consumption ≤120W
Dimensions(W*D*H) 440mm*270mm*44mm

Product Interface

 

Label Connector Type Connector Description
100G 1-2 QSFP28 Connect to external uplink equipment
1G/10G 1-8 SFP Connect to external uplink equipment
XGSPON COMBO 1-8 SFP+ XGS-PON COMBO service port
MGMT RJ45 The out-band management port
CONSOLE RJ45 The software debug port
ALM RJ45 4*external alarm input
TOD RJ45 1*1PPS+TOD input

LEDs Operating Status

The operation status of GP5810 can be determined by using the front LED. The panel LED indicator will display the status of each interface. The meaning of LED is shown in the following table.

LEDs/Buttons Color Function Description
FAN Green Fan running status ON FAN is running normally.
OFF FAN is running abnormally.
SYS Green System running status Green OFF The device is not running or power off.
Green Flash The device is running normally.
ALM Red Critical alarms ON Critical alarms are reported for the card.
OFF No critical alarm is reported for the card.
MGMT Green Port status ON The link is properly connected (link up) and in action
OFF The link is interrupted (link down).
TOD Green Port status ON The link is properly connected (link up) and in action
OFF The link is interrupted (link down).
100GE 1-2 Green Port status ON The link is properly connected (link up) and in action
OFF The link is interrupted (link down).
1G/10G1-8 Green Port status ON The link is properly connected (link up) and action
OFF The link is interrupted (link down).
PWR 1-2 Green Power status ON The AC/DC power module is normal.
OFF The AC/DC power module faulty or unavailable

Note: PWR1 indicates the left power card, and PWR2 indicates the right power card.

PON 1~8 Green PON port status ON At least one ONU has been successfully registered.
OFF No ONU has been successfully registered.
RST N/A Reset button Long press on the RST button for to restart the equipment.

Plug-In Units

On the front panel of the OLT, there are two slots for Power Supply Unit (PSU).  The mounting slots can be equipped with DC or AC type PSUs.  The different type of PSUs can be equipped into the OLT.  The below shows AC and DC type of power supply modules Two PSUs, for supplying redundancy, dual PSUs have to be installed at a system.

The power supply unit (PSU) feeds the proper power voltage to the base board of OLT.  Two PSUs are possible to be mounted into front of the chassis and it can be DC or AC type of PSU.  Therefore, you need to decide to choose proper power supply unit according to installation environment.

The power connector (AC and DC type) for main power supply is located on the front panel of the PSU.  For redundant power feeding, the second PSU has to be used.

The below shows the electrical characteristics of the OLT:

Characteristic GP5810-08
Nominal DC power supply DC: 36V ~ 75V
Nominal AC power supply AC: 100~240V; 47/63Hz
AC Rated power of power supply 110W
DC Rated power of power supply 110W

 

 

 

FAN Unit

The OLT provides 1 fan unit slots on the side panel. This plug-in unit internally consists of 3 fans. User can insert fan unit to a fan slot by slowly adjusting them to fit into the slot guid-ance. The air flows from the front side inlet to the rear side outlet.

Characteristic GP5810-08
FAN 12000 RPM adjustable fan

Software Specification

Attributes GP5810-08
PON Support N1/N2/E2 XG-PON or XGS-PON optical module

Support N1/B+, N2/C+, E2/D Combo optical modules

SN / SN + Password ONU authentication

ONU optical power monitoring

Rogue ONU detection

VLAN Support 4K VLAN

Support VLAN based on port, MAC and protocol

Support dual Tag VLAN, port-based static Q-in-Q and flexible Q-in-Q

MAC 128K Mac address

Support static MAC address setting

Support black hole MAC address filtering

Support port MAC address limit

Ring Network Protocol Support STP/RSTP/MSTP

Support ERPS Ethernet ring network protection protocol

Support Loopback-detection port loopback detection

Port Control Support two-way bandwidth control

Support port storm suppression

Support 9K Jumbo ultra-long frame forwarding

Port Aggregation Support static link aggregation

Support dynamic LACP

Each aggregation group supports a maximum of 8 ports

Mirroring Support port mirroring

Support stream mirroring

ACL Support standard and extended ACL

Support ACL policy based on time period

Provide flow classification and flow definition based on IP header information such as source/destination MAC address, VLAN, 802.1p, ToS, DSCP, source/destination IP address, L4 port number, protocol type, etc.

QoS Support flow rate limiting function based on custom business flow

Supports mirroring and redirection functions based on custom business flows

Support priority marking based on custom service flow, support 802.1P, DSCP priority Remark capability Support port-based priority scheduling function,

support queue scheduling algorithms such as SP/WRR/SP+WRR

VLAN Support 4K VLAN

Support VLAN based on port, MAC and protocol

Support dual Tag VLAN, port-based static Q-in-Q and flexible Q-in-Q

Safety Support user hierarchical management and password protection

Support IEEE 802.1X authentication

Support Radius&TACACS+ authentication

Support MAC address learning limit, support black hole MAC function

Support port isolation

Support broadcast message rate suppression

Support IP Source Guard Support ARP flood suppression and ARP spoofing protection

Layer3 Routing Support ARP learning and aging

Support static route

Support dynamic route RIP/OSPF/BGP/ISIS

Support VRRP

System management CLI、Telnet、WEB、SNMP V1/V2/V3、SSH2.0

Support FTP, TFTP file upload and download

Support SNTP

Support LLDP neighbor device discovery protocol

Support RFC 3164 Syslog

Support Ping and Traceroute

Connector Specifications

The OLT provides standardized interfaces, thus facilitating rapid and trouble-free integration into the existing network infrastructures.

PON Interfaces

The OLT contains 8 XGS-COMBO PON interface ports for SFP+ modules and below table is available .

XGS COMBO PON module list.

1 XGS-COMBO PON OLT SFP+

.   20 PIN DFB

.   Single fiber bi-directional data links with downstream 9.953Gbps and 2.488Gbps

.   Single fiber bi-directional data links with upstream 9.953G/2.488Gbps and 1.244Gbps

.   0 to 70°C operating case temperature

.   SFP+ package with SC Receptacle connector

.   High power 1577nm EML and 1490nm DFB transmitter

.   High sensitivity 1270nm/ 1310nm APD-TIA

.   Support 20km transmission distance with SMF

.   RoHS compliance

Network Interfaces

The OLT optical interface ports for SFP/SFP+ modules and below table is available SFP/SFP+ module list.

Index SFP/SFP+ Module Description
1 – Wavelength: 850 nm / Distance: 550 m / Mode: multi-mode

– Connector: LC / Data rate: 1.25Gbit/s / Core type: Dual Core

– Operating Temperature: 0 °C – 70 °C

2 -. Wavelength: 1310nm / Distance: 5km / Mode: single-mode

-. Connector: LC / Data rate: 1.25Gbit/s / Core type: Dual Core

-. Operating Temperature: 0 °C – 70 °C

3 – Wavelength: 1310 nm / Distance: 10 km / Mode: single-mode

– Connector: LC / Data rate: 1.25 Gbit/s / Core type: Dual Core

– Operating Temperature: 0 °C – 70 °C

4 – Wavelength: 1310 nm / Distance: 15 km / Mode: single-mode

– Connector: LC / Data rate: 1.25 Gbit/s / Core type: Dual Core

– Operating Temperature: 0 °C – 70 °C

5 – Wavelength: 1310 nm / Distance: 20 km / Mode: single-mode

– Connector: LC / Data rate: 1.25 Gbit/s / Core type: Dual Core

– Operating Temperature: 0 °C – 70 °C

6 – Wavelength: 1310 nm / Distance: 40 km / Mode: single-mode

– Connector: LC / Data rate: 1.25 Gbit/s / Core type: Dual Core

– Operating Temperature: 0 °C – 70 °C

7 – Wavelength: 850nm / Distance: 300m / Mode: Multimode

– Connector: LC / Data rate: 10.3125 Gbit/s / Core type: Dual Core

– Operating Temperature: 0°C ~ 70 °C

– 10GBASE-SR (10G)

8 – Wavelength: 850nm / Distance: 300m / Mode: Multimode

– Connector: LC / Data rate: 10.3125 Gbit/s / Core type: Dual Core

– Operating Temperature: 0°C ~ 70 °C

– 1000BASE-SX (1G), 10GBASE-SR (10G)

9  – Wavelength: 1310nm / Distance: 10Km / Mode: Single mode

– Connector: LC / Data rate: 10.3125 Gbit/s / Core type: Dual Core

– Operating Temperature: 0°C ~ 70 °C

– 10GBASE-LR (10G)

10  – Wavelength: 1550nm / Distance: 40Km / Mode: Single mode

– Connector: LC / Data rate: 10.3125 Gbit/s / Core type: Dual Core

– Operating Temperature: 0°C ~ 70 °C

– 10GBASE-ER (10G)

11 – Wavelength: 1310nm / Distance: 70Km / Mode: Single mode

– Connector: LC / Data rate: 10.3125 Gbit/s / Core type: Dual Core

– Operating Temperature: 0°C ~ 70 °C

– 10GBASE-ZR (10G)

12 – Wavelength: 850nm / Distance: 100m / Mode: MMF

– Connector: MMF Data rate: 100 Gbit/s / Core type: Dual Core

– Operating Temperature: 0°C ~ 70 °C

100GBASE-SR4

Purchase Info

Model Number Description
GP5810-08 8*XG(S)-PON/GPON Combo port,

8*1000M Base-X SFP/8*10GE SFP+,

2*40G/100G QSFP28

with dual hot swappable redundant dual power supply AC/DC optional

https://www.youtube.com/@e-Link-n6r

Reviews

There are no reviews yet

Be the first to review “GP5810-08 XG(S)-PON OLT | 8-Port Combo XGSPON Optical Line Terminal | 100G Uplink, 1U Rackmount”

Your email address will not be published. Required fields are marked *


Chat us with Whatsapp