8-Port Gigabit PoE+ Industrial Ethernet Switch (8× RJ45 + 2× SFP) – LNK-IMC208SGP-SFP
2SFP + 8RJ45 PoE Switch, Industrial Ethernet Fiber Switch,8-Port Industrial PoE Switch with 2 SFP
Overview
LNK-IMC208SGP-SFP,with an 8 ports 10/100/1000Base-TX + 2 port 100/1000Base-X SFP. The PoE Fiber Switch provides 8 port PoE+ function for kinds of Powered Devices to receive power as well as data over the RJ-45 cable. The 100/1000Base-X SFP supports 1 or 2 core Single-mode or Multi-mode fiber. With its reliable design and ease of use, the product is a great choice for integrating networks consisting of network devices such as IP cameras and wireless access points
- 8×10/100/1000Base-TX + 2×100/1000Base-X SFP PoE Fiber Switch
- 10/100/1000Mbps RJ45 Port Supports Full/Half-duplex, Auto-negotiation, Auto MDI/MDIX
- Supports IEEE 802.3at PoE+ (30W per port)
- Supports 802.3x Flow Control
- Support IEEE802.3/802.3u/802.3ab/802.3z/802.3x store and forward mode
- IEEE 802.3az Energy Efficient Ethernet (EEE)
- Redundant Power Inputs
- Supports DIN-Rail installation
- -40°C to 80°C (-40°F to 176°F) operating temperature
Application
-
Surveillance & Security Networks – 8×RJ45 PoE+ ports and 2×SFP fiber ports provide reliable connectivity and power for IP cameras, NVRs, and wireless APs across industrial and enterprise environments.
-
Industrial & Factory Automation – Supports industrial devices, automation systems, and network expansion; DIN-Rail mountable with redundant power inputs ensures continuous operation.
-
Flexible Network Deployment – TP ports support 10/100/1000M Base-TX, full/half duplex, auto MDI/MDIX; SFP ports support single- or multi-mode fiber for versatile network design.
-
Rugged Harsh Environment Use – Operating temperature -40°C~80°C, fanless, IP40 aluminum case; ideal for factories, warehouses, and outdoor installations.
Industrial 2SFP + 8RJ45 PoE Fiber Switch delivers high-speed PoE connectivity and robust network performance for industrial, surveillance, and enterprise networks.
Package does not include power supply and optical modules
PoE Fiber Switch Technical Indexes
| Ethernet | |
| Standards: | IEEE802.3 10BASE-T |
| IEEE802.3u 100BASE-TX/FX | |
| IEEE802.3ab 1000BASE-T | |
| IEEE802.3z 1000BASE-X | |
| IEEE 802.3az Energy Efficient Ethernet (EEE) | |
| IEEE802.3af Power over Ethernet | |
| IEEE802.3at Power over Ethernet | |
| Forward & Filtering Rate: | 14,880pps (10Mbps) |
| 148,800pps (100Mbps) | |
| 1,488,000pps (1000Mbps) | |
| Backplane bandwidth | 20Gbps |
| Packet Buffer Memory: | 9216 bits |
| Processing Type: | Store-and-Forward |
| Max Packet Length: | 9K Bytes Jumbo Frame |
| Address Table Size: | 4K MAC Addresses |
| Interface | |
| Connector: | 8 x RJ45 |
| Optical Port: | 2 x 100/1000Base-X SFP |
| PoE (Power over Ethernet) | |
| Standard: | IEEE 802.3at Power over Ethernet Plus |
| IEEE 802.3af Power over Ethernet | |
| Port: | RJ45 |
| Power Pin Assignment | 4/5(+), 7/8(-) Mode-B |
| PoE Budget: | Up to 240-watt PoE budget |
| Environmental | |
| Operating Temperature: | -40°C to 80°C (-40°F to 176°F) |
| Storage Temperature: | -40°C to 85°C (-40°F to 185°F) |
| Relative Humidity: | 5% to 95% non-condensing |
| MTBF | > 200,000 hrs |
| Electrical and Mechanical | |
| Input Power: | 48~57VDC, Redundant Power (4-pin Terminal Block) |
| Power Consumption: | 5W Max.(PoE in Use<240W) |
| Protection: | |
| Power Input Overload: | Automatic Resettable |
| Reverse Polarity: | Present |
| LED Indicators: | |
| PWR: | Power Status |
| Ethernet (Per Port): | Link/Activity |
| PoE: | PoE Status |
| Fiber: | Gigabit SFP Port: F9~F10 |
| Dimensions (WxDxH): | 95 x 70 x 46 mm |
| Weight: | 300g |
| Casing: | Aluminum Case |
| Mounting Options: | DIN-Rail mount |
| Regulatory Approvals | |
| ISO9001, CE, RoHS, FCC | |
| EN55022:2010+AC: 2011, Class A | |
| EN 61000-3-2: 2006+A1: 2009+A2: 2009 | |
| EN 61000-3-3: 2013 | |
| EN55024:2010 | |
| IEC 61000-4-2: 2008 (ESD) | |
| IEC 61000-4-3: 2010 (RS) | |
| IEC 61000-4-4: 2012 (EFT) | |
| IEC 61000-4-5: 2014 (Surge) | |
| IEC 61000-4-6: 2013 (CS) | |
| IEC 61000-4-8: 2009 (PFMF) | |
PoE Fiber Switch Ordering Information
| Model | Description |
| LNK-IMC208SGP-SFP | Mini Industrial 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP PoE Fiber Switch |
| SFP Options | ► SFP option. Please select your SFP on our SFP Options Page |
| ► SFP module is to be purchased separately. | |
| Mounting Options | ► Default DIN-Rail Bracket installed. |
| Power Options | ► 240W/5A 48VDC DIN-Rail Power Supply. Open Wire for Terminal Block. |
| ► Power Supply is to be purchased separately. |
Armyt –
So this has worked out better than I had hoped. It is 10 port not 8 port if counting the SFP slots. I had a 4 port but have been wanting a bigger PoE switch to add more cameras so being it is 10(8) was perfect. I mounted in my enclosure connect the power, swapped over the ethernet cables and boom it was running before I even got back to the DVR. I didn’t want to spend a ton on ethernet cable, and I don’t trust many of the ethernet cable makers for PoE cable as most is copper coated zinc, which is known to short out the higher the voltage run thru it. So you run the cheap stuff the max length you want to a switch, the use good wire being all copper for the hopefully shorter runs to the cameras. So this was a good review for me and 0 issues. Truly plug and play.
Spencer –
I got this for a cabinet mount project that needed a good amount of PoE ports, and this so far has been perfect. I was able to get 48V to power the device, and after connecting the switch to the router, I was able to plug in PoE cameras and sensors which worked right away and powered up, while also getting ip addresses assigned. It is small and compact, and though I haven’t yet tried the SFP ports as I don’t need them just yet, I am sure they work and for more bandwidth I will probably use them soon if it makes sense.
Jinfrey –
I added this switch to my home network, and it has made a noticeable difference. The 8 PoE ports simplify powering my devices, eliminating the need for extra cables. The 2 SFP slots offer some future-proofing, which I find useful. Installing it with the Din-Rail mount was straightforward. Since then, it has been dependable, managing all my streaming and gaming activities seamlessly. The 48~57VDC power input integrates well with my setup. If you need a switch that’s both reliable and user-friendly, this one is worth considering.
RFM –
If you are building a rack system, you need this type of switch. It supports the Din-Rail Standard and allows two SFP connections to receive and forward your fiber network. Built for heavy-duty industrial use and with the standard 4-pin power block, this is for 24/7 use in industrial or service center use. This cannot be used as a local desktop switch but suits itself perfectly as a component in an engineer’s system design.
One person found this helpful
Dom G. –
The switch powers all my cameras just fine and I don’t get any network hiccups. The case is nice and strong and it mounts in the DIN rail as expected.
DC –
This switch “has it all” for DIY wiring for CCTV / IP cameras, home security systems, home automation, etc.
Operating range up to 175F should survive attic and garage temps, at least for the East coast, where I live. Screw terminal power interface makes it easy to power, though the voltage range is fairly narrow and high – I had to source a 48V PS, as most of my stuff operates at 12VDC to 24VDC. It’s fanless, which means it’s quiet, and naturally dust and water resistant, at least to some degree. POE support make installation of cameras, etc. extremely easy, Gigabit supplies plenty of bandwidth, and finally, SFP ports means it can “speak fiber” – This is pretty big for me – it means that I can put this switch someplace risky, tie it to my network with fiber, and have *less* concern about it sending the surge from a lightning strike towards the rest of my network. It’s also great if you want to put a POE switch somewhere on a different, potentially less trustworthy, power supply, tied to your network.
B. Hunt –
This really isn’t an industrial switch. It also has the annoying DIN rail mounts that you have to yank down to get off. It also is a fair bit more cost than other generic switches like it.
With that said it powered my cameras fine and was able to maintain a 113MB/s transfer of a 500GB file. The switch hardware seems fine. I just feel like it is probably bragging above what it is capable of environmental wise.
Robin –
I received this item today, it came well packaged and is just what I expected. It works exactly as it should and seem well made.
Overall, this purchase perfectly matches its description, and I am extremely satisfied with the product. It definitely deserves a five-star rating and I would purchase again!