Industrial 10G Fiber Media Converter with AI Smart Management
The E-link LNK-AIMC10GM-SFP+ is a compact industrial 10G fiber media converter designed to connect high-speed Ethernet devices to fiber optic networks. It features one 10/100/1000/2.5G/5G/10GBASE-T RJ45 port and one 1.25G/2.5G/5G/10GBASE-X SFP+ fiber port, providing flexible copper-to-fiber connectivity for modern industrial and enterprise networks.
Unlike a conventional media converter, the LNK-AIMC10GM-SFP+ combines high-speed Ethernet-to-fiber conversion with smart device monitoring. Users can check operating status through an Android mobile app, PC web interface, or built-in LED display without requiring additional diagnostic equipment.
With support for SFP DDM diagnostics, optical power alarms, Link Fault Pass Through (LFP), scheduled system reset, wide 9–54VDC power input, 6KV surge protection, and a -40°C to +75°C industrial operating temperature range, this compact fiber converter is suitable for reliable 24/7 network connectivity in demanding environments.
Key Features
- 10Gbps Ethernet-to-Fiber Connectivity – Supports 10/100/1000/2.5G/5G/10GBASE-T on the RJ45 port and up to 10G on the SFP+ fiber port.
- AI Smart Management – Monitor device operating status through Android mobile APP, PC web interface, and LED display.
- Real-Time Device Monitoring – View voltage, current, internal temperature, Ethernet link status, fiber link status, and port speeds.
- SFP DDM Diagnostics – Monitor SFP information including TX/RX optical power, wavelength, module temperature, serial number, and other available DDM parameters.
- Custom Optical Power Alarm – Set optical power alarm thresholds to help identify potential fiber link issues.
- Scheduled System Reset – Configure scheduled device reboots for easier network maintenance.
- Link Fault Pass Through – LFP helps detect link failures and propagate fault status between copper and fiber interfaces.
- Wide 9–54VDC Power Input – Suitable for a variety of industrial DC power environments.
- 6KV Surge Protection – Enhanced protection against electrical surge events on network ports.
- Industrial Aluminum Housing – Compact 98 × 67 × 46 mm aluminum enclosure with DIN-rail mounting.
- Wide Operating Temperature – Designed for operation from -40°C to +75°C (-40°F to +167°F).
- Compact Design – Suitable for installations where cabinet and panel space is limited.
Smart Monitoring Without Additional Test Equipment
The LNK-AIMC10GM-SFP+ is designed for users who need more visibility than a conventional unmanaged fiber converter can provide.
The built-in management system provides a graphical view of device status through a PC web browser or Android mobile application. The LED display also provides quick access to important operating information directly from the device.
Users can monitor:
- System voltage
- System current
- Internal temperature
- RJ45 link status
- RJ45 link speed
- SFP/SFP+ link status
- SFP TX optical power
- SFP RX optical power
- SFP wavelength
- SFP module temperature
- SFP serial number and available DDM information
- LFP status
- Fiber alarm status
This makes troubleshooting easier when deploying high-speed fiber connections in industrial or remote environments.
10G RJ45 to SFP+ Fiber Conversion
The copper interface supports multiple Ethernet speeds from 10Mbps to 10Gbps, allowing the converter to connect legacy Ethernet devices as well as modern multi-gigabit equipment.
RJ45 Ethernet:
10M / 100M / 1000M / 2.5G / 5G / 10GBASE-T
Fiber Interface:
1.25G / 2.5G / 5G / 10GBASE-X SFP+
The RJ45 port supports auto-negotiation and auto MDI/MDI-X. For 10Gbps Ethernet, Cat 6A or Cat 7 cabling is recommended. Lower Ethernet speeds can use compatible Cat 5e, Cat 6, Cat 6A, or Cat 7 cabling.
The fiber interface supports compatible SFP/SFP+ modules for multimode and single-mode fiber applications. Actual transmission distance depends on the selected optical module and fiber type.
SFP DDM Optical Monitoring
For fiber networks where optical link condition is important, the built-in SFP diagnostics provide additional visibility into the installed optical module.
Depending on the SFP/SFP+ module, available information may include:
- TX optical power
- RX optical power
- Operating temperature
- Wavelength
- Module information
- Serial number
- Link speed
- Other available DDM parameters
The configurable optical power alarm function can help users identify abnormal receive power before a fiber link becomes unstable.
Fiber Network Applications
The LNK-AIMC10GM-SFP+ can be used wherever high-speed copper Ethernet needs to be extended or connected through fiber optic infrastructure.
Industrial Automation
Connect PLCs, industrial PCs, controllers, sensors, and other Ethernet equipment to fiber-based industrial networks.
Intelligent Manufacturing
Provide high-speed fiber connectivity between production equipment, control systems, industrial computers, and network infrastructure.
Power and New Energy
Suitable for communication networks used in power monitoring, energy systems, distributed equipment, and renewable energy installations.
Railway and Tunnel Systems
Support fiber-based communication for real-time monitoring, signaling equipment, and infrastructure networking.
Oil, Gas, and Mining
Provide fiber-based Ethernet connectivity for industrial communication systems operating in demanding environments.
Smart City and Infrastructure
Connect surveillance, control, monitoring, and communication equipment through high-speed fiber networks.
AI Computing and Advanced Technology
The high-speed 10G interface can also be used in networking environments involving AI computing equipment, autonomous systems, robotics, research facilities, and other high-bandwidth applications.
Technical Specifications
| Specification | Details |
|---|---|
| Product Type | Industrial AI Smart Managed 10G Fiber Media Converter |
| Model | LNK-AIMC10GM-SFP+ |
| Copper Interface | 1 × 10/100/1000/2.5G/5G/10GBASE-T RJ45 |
| Fiber Interface | 1 × 1.25G/2.5G/5G/10GBASE-X SFP+ |
| Ethernet Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3bz, IEEE 802.3an, IEEE 802.3ae |
| Flow Control | IEEE 802.3x Full-Duplex Flow Control |
| Energy Efficient Ethernet | IEEE 802.3az |
| Processing Method | Store-and-Forward |
| Switching Capacity | 40Gbps, Non-Blocking |
| Packet Buffer Memory | 1 Mbit |
| Maximum Packet Length | 9KB |
| RJ45 Ethernet Speed | 10M / 100M / 1000M / 2.5G / 5G / 10G |
| Fiber Speed | 1.25G / 2.5G / 5G / 10G |
| RJ45 Cable | Cat 5e / Cat 6 / Cat 6A / Cat 7, depending on Ethernet speed |
| Recommended Cable for 10G | Cat 6A / Cat 7 |
| Multimode Fiber | 50/125μm or 62.5/125μm |
| Single-Mode Fiber | 9/125μm |
| Fiber Transmission Distance | Up to 550m/2km with multimode fiber or 20/40/80/100/120/160/200km with single-mode fiber, depending on SFP/SFP+ module |
| Power Input | 9–54VDC |
| Power Connector | 4-Pin Terminal Block |
| Maximum Power Consumption | 5W |
| Surge Protection | 6KV |
| Management Interface | Android APP / PC Web Interface / LED Display |
| Mobile Platform | Android |
| iOS Support | Not Supported |
| PC Support | Windows / macOS |
| Link Fault Pass Through (LFP) | Supported |
| SFP DDM Diagnostics | Supported |
| Fiber Optical Power Alarm | Supported |
| Scheduled System Reset | Supported |
| Housing Material | Aluminum |
| Mounting | DIN-Rail |
| Dimensions (W × D × H) | 98 × 67 × 46 mm |
| Weight | 300g |
| Operating Temperature | -40°C to +75°C (-40°F to +167°F) |
| Storage Temperature | -40°C to +85°C (-40°F to +185°F) |
| Relative Humidity | 5%–95%, non-condensing |
| MTBF | >200,000 hours |
| Certifications & Compliance | ISO 9001, CE, FCC Part 15 Class A, RoHS |
Reviews
There are no reviews yet